How to make wifi antenna for android phone?

WiFi antennas are a must-have accessory for anyone with an Android phone. They allow you to connect to the internet without having to deal with dead spots or lousy signal strength. In this blog post, we will show you how to make your own wifi antenna for your Android phone. We will also provide instructions on how to install and use it.

What you need

There are many ways to make an antenna for your Android phone, but the most common way is to use a wire coat hanger. This can be a bit tricky because you have to hold the antenna in place while you twist the coat hanger. Another option is to use a piece of metal foil that has been cut into a circle. You can then stick the metal foil onto the back of your phone and position it so that the antenna is pointing towards the sky.

How to make wifi antenna for android phone

If you want to boost your signal strength and connect to better WiFi networks, you can make an antenna for your Android phone using a few household items. This tutorial will show you how.

Required Materials:
-A metal ruler or other thin, rigid object measuring at least 3 inches by 3 inches
-Tape measure
-Ruler or other thin, straight object measuring at least 1 foot long
-Wire cutters
-Solder iron and solder
-Assorted screws, washers, and nails
-Circular saw or a handsaw (if cutting metal)
-High quality WiFi antenna (or similar)
– Silicon dioxide powder (optional)

1. Begin by marking the location of the antenna on your metal ruler. Make sure that the antenna is facing in a direction that will receive the most radio waves. For best results, mount the antenna on a surface that is elevated above surrounding objects so that it has more room to work. You can use a wall if available or drill some small holes into a piece of furniture to mount the antenna higher up. The key is to find an advantageous location where the signal from your WiFi router will be strongest. Mark the position of your antenna with a pencil or marker so you’ll know where it is later when you’re ready to put it all together.

2. Cut two pieces of wire about 6 inches long each from your Ruler or other thin, straight object.


If you’re looking to improve the reception of your wifi signal, or just want to save some money on an accessory, you might want to try making your own wifi antenna. This is a simple project that can be done with a few materials and a little bit of DIY ingenuity. By following these steps, you’ll be able to boost your wifi signal in no time!

Previous Post
Next Post