How to enable usb debugging on android with broken screen?

How to enable usb debugging on android with broken screen?

If you have an Android phone with a broken screen, you may be wondering how to enable usb debugging so that you can access your data. While it is possible to do this, it is important to note that it will only work if your phone is connected to a working computer. There are two main methods for doing this: using the ADB tool or using a physical connection. We will explore both methods in this blog post.

What is USB Debugging?

When your Android phone is connected to a computer via USB, the phone will automatically enter debugging mode. In this mode, the phone will allow the transfer of data between the two devices and will also allow for any necessary updates or changes to be made to the phone’s software. However, if your phone’s screen is broken, you may not be able to access the USB debugging settings. In this case, you’ll need to use ADB (Android Debug Bridge) commands to enable USB debugging.

Why Do You Need to Enable USB Debugging?

If you have a broken screen on your Android phone, you will need to enable USB debugging so that you can connect your phone to a computer and access the data on it. USB debugging is a developer option in the Android Settings menu. To enable USB debugging, go to Settings > Developer options and select the checkbox for “USB debugging”.

How to Enable USB Debugging on Android with a Broken Screen?

Assuming you have a screen that is physically damaged and cannot be touched, there are still a few ways that you can enable USB debugging on your Android device.

One way is to use the ADB (Android Debug Bridge) commandline tool. This tool is included in the Android SDK and can be used to communicate with your Android device over a USB connection. To use this method, you will need to connect your Android device to your computer using a USB cable and then run the ADB command “adb devices” to see a list of all connected devices. If your device is listed, you can then run the command “adb shell” to open a shell on your device. From here, you can issue the commands “setprop persist.service.adb.enable 1” and “setprop persist.service.debuggable 1” to enable USB debugging on your device.

Another way to enable USB debugging on a broken screen is to use Android Control, an application that allows you to control your Android device from your computer using a USB connection. To use this method, you will first need to install the Android Control app on your computer and then connect your Android device to your computer using a USB cable. Once connected, you will be able to see your Android device’s screen on your computer and issue the necessary commands to enable USB debugging.

There are also a few third-party applications that allow you to control your Android device from your computer using

Steps to Follow to Enable USB Debugging

Assuming that your phone is still powered on, you will need to follow these steps to enable USB debugging:

1. Go to your phone’s Settings menu.
2. Scroll down and tap on About Phone.
3. Tap on the Build Number seven times. This will enable Developer Options on your phone.
4. Go back to the Settings menu and tap on Developer Options.
5. Scroll down and tap on USB Debugging to enable it.

Conclusion

There are a few different ways that you can enable USB debugging on your Android device with a broken screen, but the most effective one is probably to use the ADB command. This method requires that you have access to a computer, but it’s relatively simple to set up and use. Once you’ve enabled USB debugging using this method, you’ll be able to transfer files from your computer to your Android device and vice versa.

Previous Post
Next Post

Leave a Reply

Your email address will not be published. Required fields are marked *